Manual For Elit Diopter Sights



Wonderful diopter rear sight with cover for an M96 or M38 Swedish Mauser. Some surface discoloration, but functionally new. OWNER’S MANUAL Reliability. FiRst time, eveRy time. Tm Optimized for the SIG556 ® rifle, the SIG SAUER Rotary Diopter Rear Sight provides four site stations (CQB, 100m, 200m, 300m) with tool-less windage and elevation adjustment. This sight attaches to the Receiver M1913 Rail and is designed to work in conjunction with the Hooded Front Sight. Image, provide correct eye relief, and make diopter corrections. How Scopes Work As light passes through and beyond the objective lens, the resulting upside down image is sent to the internal lenses. Known as erector lenses, these internal lenses return the image to a right-side-up position. Finally, the ocular. Now with the advent of the new Adjustable Front Sight, even the old Type P’s and PIIs will achieve the 1,000 yard ability. The new P11 Diopter series will use the 1911 Clamp-On-Mount and work with the 1889, Kadett, 1896, 96/11, the G11 and the K11 rifles. The new P11 is also a 1,000 yard system.

Type K Diopter Sight manual
Translated from French


Swiss Diopters on the firing line

Lothar walther™ rifled high-grade steel barrel; crowned, 12 lands and grooves, Right-hand twist. Precision bore sized for match pellets - Front Globe sight with changeable aperture inserts, diopter rear sight with micrometer Adjustable rear - Full-length, match-style stock with Raised cheek piece and Adjustable length - Single stroke pneumatic The Daisy Model 753 Elite Competition Rifle is.

Manual for elit diopter sights reviews


Front Cover

ContentsPage
Description 2-3
Characteristics Techniques 2-3
Front Sight Installation 4-5
Rear Sight Installation 6-7
Adjusting the Line of Sight 8-9
Aiming 10
Parts List (not translated) 11-15

Description; The type K diopter plus front sight is a aiming system that can be mounted on any K31 without any modification to the weapon.
Technical characteristics;
The diopter is adjustable for distances of 50m to 600m. It comes with an eyepiece with a perforated disc that has six sighting holes for the convenience of the shooter and measuring, respectively; 1,0mm, 1,2mm, 1,4mm, 1,6mm, 1,8mm, 2,0mm.
Windage and elevation adjustments are made with two adjustment screws. The elevation screw should be adjusted in the following manner;
shot too high-turn elevation screw clockwise
shot too low - ' ' ' counter-clockwise
windage adjustment;
shot to left- turn adjuster to the right
shot to right- turn adjuster to the left
The adjustment screws for both elevation and windage are furnished with click stop graduated lines that represent 2 centimeters each at 300meters distance.
The sight line distance is 760mm.

(Pages 2-3)

Mounting the front sight;
-back off the mounting bolt (27) until the threads are no longer visible.
-with arrow (26) pointing towards target, slide the front sight assy. over the rifle's fixed sight until it seats
-firmly press down on the front sight barrel while while tightening the set screw (29).
- check for play in all directions (there should be none).
(Pages 4-5)

Mounting the diopter (rear sight);
-Unscrew (without forcing) the knurled mounting screw (9).
-using your left hand, set the diopter assembly in place onto the receiver with the forward leg (7) set on the wide part of the ejection port (8)and the eyepiece just on top of the rear of the receiver.
-hand tighten to set screw, then finish tightening with the factory tool.
-hand check for play in all directions (there should be none).

(Pages 6-7)

Diopter Sights For Ar

Adjusting the line of sight;
-Once in place on the receiver, make sure that the eyepiece is centered in windage (24) and elevation (25) by looking at the long white reference lines (C&D) (opposite of the side you aim through).
-next, set your factory front sight in position 10, representing 1000 meters. Now look through the diopter and line everything up on the target. The sight picture should be perfectly concentric and tangent.

(Pages 8-9)
Manual For Elit Diopter Sights

Manual For Elit Diopter Sights Reviews

Aiming process:

Align the front tunnel and rear tunnel to give a concentric sight picture, where the target appears just above the front sight post.

(Page 10)

(Pages 12-13)


Shooter's card

To see the original click here

Diopter Sights Ar15

Acknowledgements: Thanks to Vaudois for the translation, and thanks to Carlos for the scans.

H&k Diopter Sights

To return to the Schmidt-Rubin Aftermarket Sight page click here

Manual For Elit Diopter Sights For Kids